Sale!

Home » Shop » OV7670 VGA Camera Module

OV7670 VGA Camera Module

Original price was: ₵80.00.Current price is: ₵65.00.

18 in stock

The OV7670 VGA Camera Module is a low-cost, small, and efficient camera module widely used in embedded systems, IoT projects, and basic computer vision applications. It is capable of capturing images and transmitting them to a microcontroller or processor for further processing.

 

Categories: , ,

Description

 

Key Features

  • Image Sensor: CMOS sensor with VGA resolution (640 x 480 pixels)
  • Output Formats:
    • YUV (4:2:2), RGB565/555, and RAW Bayer data formats
  • Communication Interface: SCCB (Serial Camera Control Bus, similar to I2C)
  • Frame Rate: Up to 30 fps at VGA resolution
  • Lens: Fixed-focus lens
  • Power Supply: 3.3V
  • Low Power Consumption: Optimized for embedded applications
  • Adjustable Parameters: Brightness, contrast, saturation, and more via registers.

Specifications

  • Resolution: VGA (640×480), with support for lower resolutions like CIF (352×288) and QCIF (176×144).
  • Pixel Size: 3.6 µm x 3.6 µm
  • Maximum Frame Rate:
    • VGA: 30 fps
    • QVGA (320×240): 60 fps
  • Operating Voltage:
    • Analog: 2.5V–3.0V
    • Digital: 1.7V–3.0V
  • Communication Protocol: SCCB (supports register configuration)
  • Clock Input: Typically requires a 24 MHz external clock.

Pinout

  1. GND: Ground
  2. VCC: 3.3V Power
  3. SCL: SCCB Clock Line
  4. SDA: SCCB Data Line
  5. RESET: Reset (active low)
  6. PWDN: Power down (active high)
  7. VSYNC: Vertical sync
  8. HREF: Horizontal reference
  9. PCLK: Pixel clock
  10. D0–D7: Data pins (8-bit parallel output)

Applications

  • Image and video capture for IoT devices
  • Embedded vision systems
  • Educational projects
  • Object detection and tracking
  • Motion detection
  • Surveillance systems

Interfacing the OV7670

The module outputs an 8-bit parallel data signal synchronized by VSYNC, HREF, and PCLK. Interfacing it with microcontrollers like Arduino or STM32 involves the following:

  1. Hardware Setup:
    • Connect the SCCB pins (SCL, SDA) to the microcontroller’s I2C lines.
    • Connect PCLK, VSYNC, HREF, and D0–D7 to GPIO pins.
  2. Software Libraries:
    • Use libraries or write custom drivers to configure the camera module and capture data.
    • Configure camera registers to set resolution, output format, and other parameters.
  3. Data Processing:
    • Use external memory (e.g., SD cards) for storage, or process the data for tasks like object detection or color filtering.

Reviews

There are no reviews yet.

Be the first to review “OV7670 VGA Camera Module”

Your email address will not be published. Required fields are marked *

Related Products


Sensors and Modules

Original price was: ₵35.00.Current price is: ₵28.00.

12 in stock

Sensors and Modules

Original price was: ₵20.00.Current price is: ₵18.00.

4 in stock

Sensors and Modules

Original price was: ₵22.00.Current price is: ₵15.00.

20 in stock

Sensors and Modules

Original price was: ₵9.00.Current price is: ₵5.00.

20 in stock

Most Popular


Sensors and Modules

Original price was: ₵135.00.Current price is: ₵101.00.

Out of stock

Sensors and Modules

Original price was: ₵165.00.Current price is: ₵145.00.

Out of stock

Sensors and Modules

Original price was: ₵320.00.Current price is: ₵245.00.

7 in stock

Sensors and Modules

Original price was: ₵500.00.Current price is: ₵450.00.

Out of stock

Most Recent


Sensors and Modules

Original price was: ₵12,500.00.Current price is: ₵9,500.00.

Out of stock

Sensors and Modules

Original price was: ₵14,000.00.Current price is: ₵12,500.00.

Sensors and Modules

Original price was: ₵15,000.00.Current price is: ₵12,500.00.

2 in stock

Sensors and Modules

Original price was: ₵25.00.Current price is: ₵18.00.

20 in stock

Shopping Basket